CALL US : 217.679.2356

White Industries Eno Eccentric hub Black Mavic Open Pro

White Industries Eno Eccentric hub Black Mavic Open Pro

Price :
Sold Out
  • Model: Black T11 Eno Ecc OP Custom
  • Shipping Weight: 10.0lbs
  • 0 Units in Stock


These wheels are custom built in our shop to order, please allow approx 2 weeks before they will be ready to ship.

White Industries ENO Eccentric hub Black Mavic Open Pro Wheelset

New Hand Built Trued and Tensioned

Mavic Open Pro 32 Hole black Rims

White Industries Eric's Eccentric Eno 32 Hole black Rear Hub

White Industries T-11 32 Hole Black Front Hub, no quick release included with this hub.  White Industries tells us that any quality QR will work fine.

Front: 760g

Rear: 960g

Fixed/Free Threading

Requires White industries specific track cog (We sell them!)

Requires standard English lockring for fixed gear use (not included)

Standard English threading for freewheel

Sapim Race Double Butted 2.0/1.8/2.0mm 14/15 Gauge black Spokes

Black Brass Nipples

700c Clincher

100mm Front Spacing

130mm Rear Spacing

Check below the images for more info about the Eno Hub.

Velo Mine customer service  phone 217.679.2356217.679.2356 - Text 217.827.1173217.827.1173 - email [email protected]

Our Eccentric ENO line of hubs are made specifically for bikes with vertical dropouts. The majority of bicycle frames made today are made with vertical dropouts, however, converting the frame to a single speed presents the problem of how to tension the chain. Chain tension with vertical frames can be addressed three ways: by using a chain tensioner, using an eccentric bottom bracket, or with our Eccentric ENO. The Eccentric ENO is an easy, clean, and simple answer to the problem. The eccentric rear hub allows the rider to adjust the chain tension by simply rotating the elliptical axle ends up and back in the dropouts. As the hub rotates back, the chain is pulled into tension. The Eccentric ENO is available in two models: The Eric's Eccentric ENO and Eccentric Disc ENO. The Eric's Eccentric ENO is a flip/flop design fixed/free. The disc model has an ISO standard six bolt rotor on the non-drive side and is freewheel compatible on the drive side. We recommend running the Eccentric Disc ENO with the eccentric caliper mount adaptor featured below. Made in the USA.

Wheel building
Center to
Eric's Eccentric ENO32.5mm 48.0mm
Eric's Eccentric Disc ENO 32.0mm60.0mm

ModelEccentric ENO

Axle solid aluminum
Bearingstwo: 6902-2rs
O.L.D.126mm, 130mm, or 135mm
Disc: 135mm
Weight 322 grams: eccentric
384 grams: eccentric disc
Freewheel1.37 x 24 tpi freewheel thread
Fixed splined fixed gear cog w/
english lock ring
Spoke Hole Drilling 28h, 32h, 36h
Finishpolished silver, black anodized